Probiotic Nitrite - Quick Cleaner for Aquaculture

Nitrite Quick Cleaner

(dedicated to degrading nitrite)

This product is specially developed for the high nitrite content in high-density aquaculture ponds and the water quality at the bottom of the pond is easily corrupted. It is used to repair the bottom of the pond, improve water quality, and quickly degrade nitrite. It is a compound probiotic preparation. This product mainly contains compound nitrifying bacteria, denitrifying bacteria and various other probiotics, such as Bacillus subtilis, Bacillus natto, etc.

[main ingredient] Nitrifying bacteria, denitrifying bacteria, etc.

[features] Pale yellow powder.

[Colony Count] The total amount of probiotics per gram exceeds 6 billion.

[scope of application] is suitable for various hydroponic modes.

[Functional principle]

Nitrifying bacteria can gradually convert ammonia nitrogen and nitrogen-containing organic matter (feces, residual bait, animal and plant debris, and organic residues) into nitrate, which can be absorbed and utilized by algae. Denitrifying bacteria convert excess nitrate into nitrogen gas and nitric oxide₂scattered into the air. Therefore, this product can quickly eliminate harmful substances such as nitronitrogen, keep water quality stable, adjust PH value, and completely eliminate the harm of nitrite.

[Function]

1. Accelerate the decomposition of organic matter in water, reduce and avoid the precipitation of organic matter.
2. Accelerate the cycle of nitrogen in water, reduce the existence time of ammonia nitrogen and nitrite, and finally completely remove nitrite.
3. Block the nutrient source of vibrio and phosphorescent bacteria, inhibit the growth of harmful bacteria, promote the growth and reproduction of beneficial algae, maintain the ecological balance of the water body, and keep the water body fertile, vibrant, fresh and suitable.

[Dosage]

Soak this product in water for more than three hours, and then sprinkle the diluted medicinal solution evenly into the pool.

1. Under normal circumstances, a package can be used within 2001-26687 meters³water, once every 7-10 days.
2. If ammonia nitrogen is greater than or equal to 0.6mg/L, and nitrite is greater than or equal to 0.1mg/L, spray 600g of this product every 667m³Watering for the first time, then watering 300-400 grams per 667 meters every 7-10 days³Once, in the later stage of breeding, if the water quality deteriorates, the dosage can be increased appropriately.
3. Special dosage: when ammonia nitrogen is greater than or equal to 0.9mg/L, and nitrite is greater than or equal to 0.2mg/L, sprinkle 800g of this product per 667 meters³For the first watering, add 400 grams per 667 meters after 24 hours³Water, after 48 hours, decide whether to add or not according to the degradation of nitrite. Many practices have proved that if you add 300g per 667m³The third time the water, the nitrite content can be reduced to a safe level. When the water quality deteriorates, the dosage can be increased or the usage time can be shortened. When using this product, turn on the aerator or add an oxidizing agent to obtain a more significant effect.

[attention]

1. Do not use this product with fungicides.
2. Use it on a sunny morning with the aerator on.
3. Please use as soon as possible after opening the package, keep away from moisture.
4. When using this product, keep the pool water temperature above 15°C.

[shelf life] 18 months.