CAS 25608-12-2 Solid Superabsorbent Polymer Potassium Polyacrylate

  • $1.35 / 25 - 999 kilograms
    $0.48 / 1000 - 9999 kilograms
    $0.35 / >=10000 kilograms
  • 25 kilograms
  • Jinan Huijinchuan Chemical Co., Ltd.
  • Shandong, China
  • Mr Jokey HJC

Product Detail

MOQ:25kg/bagQuality Control:Certificate of Authenticity, SDS, TDS
Packaging Details:Bagdeliver goods:within 7-15 days
EINECS number:/Shelf life:2 years
model:25608-12-2type:Synthetic Resins and Plastics
payment terms:L/C, T/TPackage:25kg/bag
IF:(C3H6O2)n.(C3H5KO2)msample:available
Other names:Potassium polyacrylate polymerCAS number:25608-12-2
purity:100%place of origin; place of origin:China
product name:Potassium polyacrylate polymer
Product Description
CAS 25608-12-2 Solid Superabsorbent Polymer Potassium Polyacrylate
 
1. Plants and crops:— The dosage is 45 kg per hectare, which can effectively increase the germination rate of seeds and promote the growth of seedlings when combined with seed hole application or furrow application to the soil around the seeds.2. Seed coating:— The particle size of SAP used for seed coating should be less than 0.3 mm. After SAP coating, the seeds emerge quickly, are firm and have good disease resistance. This is a simple method for plants in arid areas to use SAP, and the dosage is small, low-cost and good performance.
Specification
CAS 25608-12-2 Solid Superabsorbent Polymer Potassium Polyacrylate
category
usage
recommended dose


crop

&
plant
&
fruit
1. Put the juice into a certain amount of water. After the condensation water is formed, immerse the seeds in it and mix well.
SAP: Seed: Water = 1:50:200
2. Seeds should be soaked for more than three hours. After filtering and seeding, stop water treatment
Dropped on their skins, the juice should spread evenly over the surface of the seeds.


SAP: Seed = 1:30
3. Mix well: apply the sap to the surface at the rate of 45 kg per hectare, and then use
The depth before planting is about 20 cm.


45kg/ha
4. Hole application or furrow application: mix sap with fine soil, 30kg-45kg each, dosage 1%-3%.
Ha, then put it directly in the ditch.


30-45 kg/ha


sapling
Dip roots: sap and water are made into hydrogel at a ratio of 1:200, and soil can also be added, sap: water: soil = 1:300:60,
Immerse completely in the hydrogel, fertilize and mix with the sap at a rate of 45 to 60 kg per hectare.


SAP: Water: Soil
= 1:300:60
in conclusionFor sandy soils, use SAP with high water absorption. For clay, choose SAP with moderate water absorption. Improve the emergence rate and survival rate, promote crop growth, and increase crop yield. Increase the water content of the 0-20 cm plow layer by more than 20%. According to our field experience, wheat, corn, sunflower, and potato will emerge 1-3 days earlier and increase the emergence rate by more than 15%. In the case of low soil moisture, The emergence rate is above 10% to 33%, the survival rate of seedlings is increased by 10% to 30%, the root system is increased by 5% to 21%, and the leaf area, diameter and height are increased by 5-10%. In dry conditions, the effect was more pronounced. In the middle and late stages, the color and maturity were significantly better than those without SAP. .
VIEW MORE

Related Products